CLEANPAK International is proud to offer a full line of custom Laminar Flow Plenums, Laminar Flow Hoods and Laminar Flow Booths that meet & exceed the most stringent Pharmaceutical and Biotech Grade A / ISO CLASS 5 design requirements. Our patented Flush Grid is utilized in all LAF modules. Bottom load Flush Grid easily accepts pre-gelled filters by loading straight-up from the room side. Modules are available in various grades of stainless steel materials or can be fabricated from powder coated mild steel utilizing a highly chemically resistant urethane coating.

CLEANPAK custom design offers a cost-effective combination of construction materials to fit your particular budget. Our proprietary seamless welded design exceeds cGMP and FDA requirements providing smooth seams & completely flush surfaces for easy wipe down. CLEANPAK's reputation for detailed custom design offers flexibility to meet the most complex fill finish layouts. CLEANPAK's experience in designing & testing hoods with different elevations, configurations & layouts provides the capabilities to handle any type of project.

CLEANPAK LAF performance can meet the highest level required in the industry whether 0.3 or 0.5 micron containment, 90 FPM or 120 FPM air velocities or positive / negative pressure requirements. Unidirectional air flow is achieved within 4 inches of discharge screens with Flush Grid design and can be maintained at the work surface even in high bay areas. All CLEANPAK LAF modules meet EC guidelines for critical areas under operating conditions.

Typical Applications:

• Fill or Finish Operations
• Freeze Dryers Areas
• Autoclaves or Ovens Areas
• Cell Culture Areas
• Research & Development Labs
• Explosion Proof Areas - Class 1 Div. 1 or Class 1 Div. III

Control Options:

• Modbus system to interface with building management system (BMS)
• Single digital control panel with general fault alarm or remote NEMA panel
• PC system or hand held unit using LON Works protocol
• Owner preferred Variable Frequency Drive (VFD)

Accessory Options:

• Curtain walls – hard or soft materials
• Static pressure test ports
• Aerosol challenge test ports – single or manifold
• Fire protection – fully concealed true flush sprinkler heads
• Custom closure panels to mate with existing walls or equipment
• Gel Link seals at module joints & wall closures
• Structural framing for floor supported applications
• Seismic restraints
• Sensible cooling
• Custom sound attenuation
• Pre-filters
• Remote fan unit
• Diffuser screens with either snap-in clips, post / acorn nut or hinged attachments

I Home I Site Map I Parts List I Servicor